Product Name: ITW | Asus ProArt X670E-Creator Wifi ATX AM5 DDR5 Motherboard
Specification
Model
✎ ProArt X670E-CREATOR WIFI
CPU
✎ AMD Socket AM5 for AMD Ryzen™ 7000 Series Desktop Processors*
Chipset
✎ AMD X670
Memory
✎ 4 x DIMM, Max. 128GB, DDR5 6400+(OC)/ 6200(OC)/ 6000(OC)/ 5800(OC)/ 5600(OC)/ 5400(OC)/ 5200/ 5000/ 4800 ECC & Non-ECC, Un-buffered Memory*
✎ Dual Channel Memory Architecture
✎ Supports AMD Extended Profiles for Overclocking (EXPO™)
✎ OptiMem II
* Supported memory types, data rate(Speed), and number of DRAM module vary depending on the CPU and memory configuration.
** Non-ECC, Un-buffered DDR5 Memroy supports On-Die ECC function.
Graphics
✎ 1 x HDMI® port**
✎ 2 x USB4® ports support USB Type-C® display outputs***
* Graphics specifications may vary between CPU types.
** Supports 4K@60Hz as specified in HDMI 2.1.
*** Supports max. 8K@60Hz as specified in DisplayPort 1.4.
**** Output at USB4_EC1 and USB4_EC2, each requires a USB-C® to DisplayPort adapter cable. VGA resolution support depends on processors' or graphic cards' resolution.
Expansion Slots
✎ AMD Ryzen™ 7000 Series Desktop Processors*
■ 2 x PCIe 5.0 x16 slots (support x16 or x8/x8 modes)
✎ AMD X670 Chipset
■ 1 x PCIe 4.0 x16 slot (supports x2 mode)**
* Please check the PCIe bifurcation table in support site
** PCIEX16_3 shares bandwidth with M.2_3 slot. Please adjust in BIOS setting to enable PCIEX16_3.
Storage
✎ Total supports 4 x M.2 slots and 4 x SATA 6Gb/s ports*
✎ AMD Ryzen™ 7000 Series Desktop Processors
■ M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 5.0 x4 mode)
■ M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 5.0 x4 mode)
✎ AMD X670 Chipset
■ M.2_3 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)**
■ M.2_4 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 x4 mode)
■ 4 x SATA 6Gb/s ports
*AMD RAIDXpert2 Technology supports both NVMe RAID 0/1/10 and SATA RAID 0/1/10.
** M.2_3 slot shares bandwidth with PCIEX16_3. When PCIEX16_3 is in operation after adjusting in BIOS settings, M.2_3 slot will only run at PCIe x2 mode.
Ethernet
✎ 1 x Marvell® AQtion 10Gb Ethernet
✎ 1 x Intel® 2.5Gb Ethernet
✎ ASUS LANGuard
Wireless & Bluetooth
✎ Wi-Fi 6E
✎ 2x2 Wi-Fi 6E (802.11 a/b/g/n/ac/ax)
✎ Supports 2.4/5/6GHz frequency band*
✎ Bluetooth® v5.2
* WiFi 6E 6GHz regulatory may vary between countries.
USB
✎ Rear USB (Total 11 ports)
■ 2 x USB4® with Intel® JHL8540 USB4® controller ports (2 x USB Type-C®)
■ 1 x USB 3.2 Gen 2x2 port (1 x USB Type-C®)
■ 7 x USB 3.2 Gen 2 ports (7 x Type-A)
■ 1 x USB 2.0 port (1 x Type-A)
✎ Front USB (Total 9 ports)
■ 1 x USB 3.2 Gen 2x2 connector (supports USB Type-C® with up to 60W PD/QC4+)
■ 1 x USB 3.2 Gen 1 header supports 2 additional USB 3.2 Gen 1 ports
■ 3 x USB 2.0 headers support 6 additional USB 2.0 ports
Audio
✎ Realtek S1220A 7.1 Surround Sound High Definition Audio CODEC*
■ Impedance sense for front and rear headphone outputs
■ Internal audio Amplifier to enhance the highest quality sound for headphone and speakers
■ Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking
■ High quality 120 dB SNR stereo playback output and 113 dB SNR recording input (Line-in)
■ Supports up to 32-Bit/192 kHz playback*
✎ Audio Features
■ Power pre-regulator reduces power input noise to ensure consistent performance
■ Premium audio capacitors
■ Dedicated audio PCB layers
■ Audio cover
■ Unique de-pop circuit
* Due to limitations in HDA bandwidth, 32-Bit/192 kHz is not supported for 7.1 Surround Sound audio.
** A chassis with an HD audio module in the front panel is required to support 7.1 Surround Sound audio output.
Back Panel I/O Ports
✎ 2 x USB4® with Intel® JHL8540 USB4® controller ports (2 x USB Type-C®)
✎ 1 x USB 3.2 Gen 2x2 port (1 x USB Type-C®)
✎ 7 x USB 3.2 Gen 2 ports (7 x Type-A)
✎ 1 x USB 2.0 port (1 x Type-A)
✎ 1 x DisplayPort (Input only)
✎ 1 x HDMI® port
✎ 1 x Wi-Fi Module
✎ 1 x Marvell® AQtion 10Gb Ethernet
✎ 1 x Intel® 2.5Gb Ethernet
✎ 3 x Audio jacks
✎ 1 x BIOS FlashBack™ button
Form Factor
✎ ATX / 12inch x 9.6inch (30.5cm x 24.4cm)
✅Reminders:
1. Take a video of yourself while unboxing the parcel. This would serve as proof if you have concerns with the parcel.
2. Ask the delivery rider to present a valid ID (e.g., driver’s license, UMID) and/or take a picture of the delivery rider with your payment.