Product Name: ITW | GIGABYTE 480GB 2.5" SATA III SSD /Solid State Drive (GP-GSTFS31480GNTD)
■ Form Factor: 2.5-inch internal SSD
■ Interface: SATA 6.0Gb/s
■ Total Capacity: 480GB*
■ Warranty: Limited 3-years
■ Sequential Read speed: up to 550 MB/s**
■ Sequential Write speed: up to 480 MB/s**
■ TRIM & S.M.A.R.T supported
*Note: 1GB = 1 billion bytes. Actual useable capacity may vary.
**Speeds based on internal testing. Actual performance may vary.
Specification
✎ Interface: SATA 6.0Gb/s
✎ Form Factor: 2.5-inch internal SSD
✎ Total Capacity: 480GB
✎ NAND: NAND Flash
✎ External DDR Cache: N/A
✎ Sequential Read speed: Up to 550 MB/s
✎ Sequential Write speed: Up to 480 MB/s
✎ Random Read IOPS: up to 75k
✎ Random Write IOPS: up to 70k
✎ Dimension: 69.85 x 7 x 100 mm
✎ Mean time between failure (MTBF): 2M hours
✎ Power Consumption (Active): Average: R : 2240mW; W : 2610mW
✎ Power Consumption (Idle): 170mW
✎ Temperature (Operating): 0°C to 70°C
✎ Temperature (Storage): -40°C to 85°C
✎ Warranty
■ 1. Limited 3-years or 200TBW
■ 2. Limited warranty based on 3 years or 200TBW, whichever comes first.
*TBW (Terabyte Written):Terabytes Written is the total amount of data that can be written into an SSD before it is likely to fail.
■ 3. The "percentage of SSD life" (SMART ID: E7 or A9) in SMART page of the "GIGABYTE SSD toolbox" program will be used as the determining criteria when the number is 0 means out of warranty. (A new unused product will show the percentage of 100.)
✎ Note
■ Test system configuration: configuration may vary by models; we will choose the latest platform for verification.
■ Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
■ Speeds based on internal testing. Actual performance may vary.
■ 1GB = 1 billion bytes. Actual useable capacity may vary.
